LC75345M Datasheet | SANYO

Overview The LC75345M is an electronic volume system that can control the volume, balance, 2-band equalizer, super bass, and input switching functions by serial data input. Functions - Volume: 0 d B to - 78 d B (1-d B step) and - ∞ (64 positions) 0 d B to - 50 d B (1-d B step), - 50 d B to - 70 d B (2-d B step), - 70-d B to - 78 d B (4-d B step) Balance function with separate L/R control - Treble: ±10-d B control in 2-d B steps is possible. Shelving characteristic. - Bass: ±10-d B control in 2-d B steps is possible. Peaking characteristics. - Super bass: +10-d B control in 2-d B steps is possible. Peaking characteristics. - Selector: 5 input signals can be selected both for L and R - Input gain: 0 d B to +30 d B (2-d B step) amplification is possible for the input signal. - General-purpose amp (ATT): 2 on-chip general-purpose amplifiers Features - On-chip buffer amplifier cuts down number of external ponents - Low switching noise generated by on-chip switch due to use of silicon gate CMOS process - On-chip reference voltage circuit for analog ground - Controls performed with serial data input (CCB) Package Dimensions unit: mm 3263-MFP36SDJ (375 mil) [LC75345M] 36 19 1 0.8 (0.8) 0.3 18 0.1 (2.25) 7.9 2.45max 10.5 0.65 SANYO: MFP36SDJ (375 mil) - CCB is a trademark of SANYO ELECTRIC CO., LTD. - CCB is SANYO’s original bus format and all the bus addresses are controlled by SANYO. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft’s control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated...